F97 Crystal Air Nozzle For Digital Bubble Wall
AQUAMAX F97 BUBBLE WALL NOZZLE
What is the F97 Flower Nozzle and Why should we use it?
# F97 Flower Nozzle is a revolutionary nozzle system for digital and plane Bubble Wall Because this nozzle gives you the flexibility and reliability for bubble wall's life. F97 is the best nozzle in market to produce bubble size from 5mm diameter to 0.1mm diameter inside the bubble wall air channel.
# The bodies of the F97 Nozzle are made of high-density industrial polymer and especially chemically treated to maintain the body elasticity for a long long time.
# The air stones are made of strong crystal grain which is also non-reactive to any kind of acid or base. This property gives the flexibility to clean this nozzle directly with acid like vinegar or others.
# It comes with a silicon gasket to prevent any kind of water leakage instantly.
# Follow the installation instructions for the nozzle.
# You can change the nozzle at any time you wish, also you can use it with a different types of nozzle with the same nozzle base. This nozzle is easy to install, easy to use and easy to service all the time.
# F97 nozzle can produce various kinds of patterns, TEXT, and Emojis on a bubble wall with DS3152 and DS3153.
Bubble Wall Panel Drawing (Dimensions are in mm)
# STEP 01: First make Ø22mm hole on the bottom of the front panel as per
the drawing shown in Fig No. 1.1. 
# STEP 02: Check the smooth surface of the base of the nozzle.
# STEP 03: Take a sandpaper of 180 grade and rough the flat surface of the
F97 Flower Base until all the surface has adequately scratched. Then clean
the base.
# STEP 04: Take the Bond (use 743) and put it evenly on the base
surface. Hold it flat and instantly flip it vertically. Now you have a base
vertically flipped with a glued base.
# STEP 05: Now place it on the panel and match the Ø22mm hole center. Keep the notch DOT point downward to the floor side.
Then put a HEAVY pressure & hold it for 10-20 sec. Let it be dried for 5 min,
then apply the bond again at the edge of the base and wait for another 15
min. Repeat the procedure until you are satisfied with the bond strength.
# Your F97 V2 nozzle base installation is complete and ready to plug in any F97
V2 nozzle series. This is that simple.
# Please use a non-return valve (NRV) in between every nozzle and air pump
Exploded View of AquaMAX Bubble Wall
Click HERE to Download the Full Article Here in PDF
Use AquaMAX genuine spare parts for your bubble wall. Order NOW!!
AQUAMAX Digital Bubble Wall Technology, Product of MACAW
Contact UsLegal Name : M/s MACAW EnterpriseAddress : Office No. 11, Apanjan Enclave, 59 Rishi Aurobindo Road, Konnagar,
Hooghly, West Bengal, India - 712235GSTIN : 19CIHPM6775M1ZBPhone No. : +91-8777 5056 91 / +33 3550 4236 | Whatsapp @ +91-8777 5056 91Email ID : enterprise.macaw@gmail.comWebsite : www.macawenterprise.com
Hooghly, West Bengal, India - 712235
Comments
Post a Comment