What is the DS3152 Digital Bubble Wall Pattern Controller and Text Generator?

DS3152

# DS3152 is a revolutionary product by MACAW for Digital Bubble Wall. This device simplifies most of the wiring and programming for bubble walls. Just Plug & Play.

# It has pre-programmed patterns for 3 to 16-channel bubble walls. Just set your channel from the menu and you are done.

# Each channel has 32 different patterns like abstract patterns, 2D images, and emojis. You can adjust the pattern's height and duration of the graphics as required in different sizes of bubble walls.

# DS3152 is capable of generating "English TEXT" in a 100%Glycerin based panel system. TEXT height and line thickness are adjustable from the user end.

# DS3152 is capable to generate 3D bubble array in AQUAMAX 3D Bubble Wall. It is a cutting-edge technology in this segment from MACAW. For any 3D panel requirement, please contact MACAW Enterprise at the given details.

# DS3152 has the most efficient silent MOSFET to work in a silent environment.

# You can expand its output channel by two methods, one by generic signal multiplexing and another by I2C protocol communication bus. By using multiplexing the signal, you can copy the exact patterns to endless panels. By using the I2C protocol, you can control individual channels up to 1024 channels. For form or details check the I/O expanding procedure described in pages no. 6 & 7.

# As a bubble wall makes a huge inductive spike from its DC motorized Air Pump. DS3152 has the most advanced surge and back EMF protection to save the device from the inductive load. It can eliminate up to 5000 Volt spike.

# DS3152 has an inbuilt pixel LED driver to drive the LED strips for bubble wall lighting. The LED can be connected with the "BanlanX" mobile application through Bluetooth. The LED will be responsive to sound and music.

What is the DS3153 Digital Bubble Wall Output Multiplexor?

DS3153

# DS3153 is an output multiplexor slave module for the DS3152 master board. It can mirror the patterns or images from master modules. It also amplifies the signals.

# DS3153 also has the 5000 Volts I/O isolation and surge voltage protections. It also prevents any noise from mixing into data lines.

# It carries the LED signals and delivers them to each individual pixel LED strip.

# You can connect an infinite number of DS3153 with each other to multiplex the pattern signals to sync without her bubble panels and reduce the production cost.# All DS3152 and DS315 is compatible with 5VDC to 36VDC driving voltage. Remember driving voltage will be the output voltage for the pumps.

A. Signal Multiplexing For DS3152: (Economical Method)

Signal Multiplexing For DS3152

# By using this method, you can mirror the same pattern to multiple bubble walls. This is the most economical way to make digital bubble walls if all the bubble wall has the same channels.

# The distance between two devices must not cross 120 Feet of wire length.

# There are no limitations of mirrored output expansion as each device amplifies the signal in every stage.# It reduces the wiring job and syncs all the bubble walls with the exact same patterns.

# This method is only applicable if all the bubble wall / TEXT Display has the same no. of channels.

B. Output Expansion Through the I2C Method (For Expensive Bubble Walls)

Output Expansion Through the I2C Method

# By using this method, you can control each individual channel for multiple bubble walls having different channels. You can also create long panelized bubble walls up to 1024 individual channels.

# This communication protocol is based on new I2C serial communication. Remember, distancebetweentwodevices must not cross 10 Feet wire length.

# Optional functions: Pattern & TEXT control from mobile application over WiFi & Bluetooth.

# This device does not only work in a bubble wall you can also use it as an IOT getaway for your outstation controlling.

# DS3152 is completely re-programable by the user and the user can use it for different applications.

DS3152 Wiring Diagram: